CD74HC4060PWTG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Frequency | 35MHz |
| Pin Count | 16 |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 14 |
| Propagation Delay | 450 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Unidirectional |
| Max I(ol) | 0.004 A |
| fmax-Min | 23 MHz |
| Clock Edge Trigger Type | Negative Edge |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
CD74HC4060PWTG4 Overview
This device is supplied in the TSSOP package. There are 16 terminations used for its configuration. With a supply voltage of 4.5V volts, it is possible to run it in a fully flexible manner. A wire connects the 1elements. 16is the number of pins on all components. Tape & Reel (TR)is used to package it. As part of the circuit, there are 16pins that connect other components. To mount it, use the method of [0]. In this case, it appears as a member of the HC/UH family. As far as the device is concerned, there are 14bits of information. Pbfree code may produce the result yes. A temperature grade of MILITARYis specified for this device. Its packaging is provided by [0]. Electrical characteristics remain stable for extended periods of time at [0]. Temperature ranges are specified, with -55°Cset as a lower limit. It operates at a frequency of 35MHz Hz. The maximum voltage that can be applied to the device is 6V. The device can operate at as low a voltage as 2V.
CD74HC4060PWTG4 Features
Embedded in the TSSOP package
Frequency of 35MHz
CD74HC4060PWTG4 Applications
There are a lot of Texas Instruments CD74HC4060PWTG4 Counters & Dividers applications.
- Frequency dividers
- Control counters
- Signal gating
- Programmable decade counters
- TRUE RMS-TO-DC CONVERSION
- Fixed or Programmable Frequency Division
- Clocks
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Binary counter/decoder
- Time-delay circuits