CD74HC299EE4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Number of Terminations | 20 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | COMMON I/O PINS; GATED OUTPUT CONTROL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Temperature Grade | MILITARY |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 300 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 300 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| High Level Output Current | 7.8mA |
| Low Level Output Current | 7.8mA |
| Number of Input Lines | 10 |
| fmax-Min | 23 MHz |
| Height | 4.57mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74HC299EE4 Overview
The device is embedded in PDIP package. This chip has a total termination count of 20. The case Rail/Tube contains it. The part's operating supply voltage is rated 4.5V. 20 pins are located on the device. The recommended mounting method is Through Hole. This electronic component is classified as HC/UH. According to the specification, this chip's operating supply voltage falls within the range of 5V. Please take note of the following additional aspects of this section: COMMON I/O PINS; GATED OUTPUT CONTROL. This device has 10 input lines available. The total number of IC chip bits is 8. This board has 20 pins in total. At temperatures below 125°C, it is recommended for use. For this device to work, it should not go below -55°C. 6V is the supply voltage used. A voltage higher than 2V is used as a supply voltage. It runs on a quiescent current of 8μA. An electronic device such as this one has 1 circuits in it.
CD74HC299EE4 Features
With 20 pins
Operate supply voltage at 5V
Quiescent Current at 8μA
CD74HC299EE4 Applications
There are a lot of Texas Instruments CD74HC299EE4 Shift Registers applications.
- LED matrix control
- 7-segment display control
- Flash Memory
- Parallel data
- Parallel to serial converter
- Dual-rank shift, hold, and bus applications
- Serial-to-parallel data conversion
- data transfer
- temporary data storage
- Delay Line