CD74HC273M96E4
| Parameters | |
|---|---|
| Current - Output | 5.2mA |
| Propagation Delay | 150 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 12 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Logic IC Type | D FLIP-FLOP |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 8 |
| Prop. Delay@Nom-Sup | 45 ns |
| High Level Output Current | -5.2mA |
| Low Level Output Current | 5.2mA |
| fmax-Min | 23 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | FF/Latch |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Frequency | 60MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
CD74HC273M96E4 Overview
SOICis the packaging method. D flip flop is embedded in the Tape & Reel (TR) package. In total, it contains 1 elements. There are 20 terminations,The power source is powered by 4.5V. It belongs to the family of electronic devices known as HC/UH. In this case, the electronic component is mounted in the way of Surface Mount. It is designed with 20 pins. This device exhibits a clock edge trigger type of Positive Edge. This device is part of the FF/Latchbase part number family. A reliable performance of this D flip flop makes it well suited for use in TR. It consumes 8μA of quiescent current without being affected by external factors. A -5.2mAvalue is set for the high level output current. It is set to 5.2mAfor low level output current. Ideally, the operating temperature should be lower than 125°C. The operating temperature should be higher than -55°C. It is powered by 2V as its minimum supply voltage. 6Vis the maximum supply voltage supported by it. A frequency of 60MHzcan be achieved. The logic IC it adopts is D FLIP-FLOP. A total of 1 functions are available on the T flip flop. The D latch is equipped with 20 pins. In addition to its maximum design flexibility, the output current of the flip flop is 5.2mA.
CD74HC273M96E4 Features
Tape & Reel (TR) package
20 pins
1 Functions
20 pin count
CD74HC273M96E4 Applications
There are a lot of Texas Instruments CD74HC273M96E4 Flip Flops applications.
- Frequency Divider circuits
- ESD performance
- Shift Registers
- Convert a momentary switch to a toggle switch
- Reduced system switching noise
- Memory
- 2 – Bit synchronous counter
- Patented noise
- Common Clocks
- Registers