CD74HC195PWTG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 265 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Number of Bits per Element | 4 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 6 |
| fmax-Min | 23 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
CD74HC195PWTG4 Overview
There is a TSSOP package embedded with the device. It sums up to 16 where the chip's terminations add up. This item is packed in case Tape & Reel (TR). 4.5V is the part's operating supply voltage. The part consists of 1 elements. Devices with 16 pins are available. It is recommended to mount by Surface Mount in order to get the best results. It is a component of the HC/UH. It is noted that the operating supply voltage of this chip falls within the range 5V. The following additional aspects of this section are worth noting: COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT. A device with 6 input lines is available. There are a total of 16 pins on it. Using it below 125°C is recommended. Ideally, it should not fall below -55°C. A voltage of 6V is used to supply this voltage. Voltages higher than 2V are used for this supply.
CD74HC195PWTG4 Features
With 16 pins
Operate supply voltage at 5V
CD74HC195PWTG4 Applications
There are a lot of Texas Instruments CD74HC195PWTG4 Shift Registers applications.
- Pattern Recognizers
- LED matrix control
- Data Processors
- data manipulation
- Data manipulation
- Flash Memory
- Dual-rank shift, hold, and bus applications
- store data in digital form
- Remote control holding register
- temporary data storage