CD74HC195PWTE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 265 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Number of Bits per Element | 4 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 6 |
| fmax-Min | 23 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
CD74HC195PWTE4 Overview
In package TSSOP, there is an embedded device. 16 is the total number of terminations on the chip. Tape & Reel (TR) is the case in which it is packed. There is 4.5V operating supply voltage listed on the part. It is a part that has 1 elements on it. The device is equipped with 16 pins. It is recommended that the mount should be done by Surface Mount. In this case, the electronic component belongs to the HC/UH. The operating supply voltage of this chip is noted to be within the range 5V. Additional aspects of this section are as follows: COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT. This device has 6 input lines available. The total number of pins is 16. Under temperatures below 125°C, it is recommended to use it. Operation of this device requires a value greater than -55°C. A voltage of this type is employed under 6V. This supply voltage is employed higher than 2V.
CD74HC195PWTE4 Features
With 16 pins
Operate supply voltage at 5V
CD74HC195PWTE4 Applications
There are a lot of Texas Instruments CD74HC195PWTE4 Shift Registers applications.
- ROM Chips
- Remote control holding register
- Pseudo Random Pattern Generator
- Data Processors
- Interconnectors
- Generate time delay toward digital circuits
- Parallel data
- temporary data storage
- Serial-to-parallel data conversion
- Counter