CD74HC195PWT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 4.5V |
| Frequency | 50MHz |
| Base Part Number | 74HC195 |
| Function | Universal |
| Output Type | Complementary |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 265 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Register, Bidirectional |
| Output Polarity | TRUE |
| Number of Bits per Element | 4 |
| Trigger Type | POSITIVE EDGE |
| Max Input Current | 160μA |
| Number of Input Lines | 6 |
| fmax-Min | 23 MHz |
| Length | 5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
CD74HC195PWT Overview
The device is embedded in 16-TSSOP (0.173, 4.40mm Width) package. 16 is the number of terminations on the chip. A Tape & Reel (TR) case is used to pack it. 4.5V is the part's operating supply voltage. The part consists of 1 elements. 16 pins are located on the device. Using Surface Mount as a mount point is recommended. In the HC/UH series, the electronic component belongs. This component is mounted in the way of Surface Mount. There is a temperature range of -55°C~125°C. Votage within the range of 2V~6V is supplied. The 74HC series is associated with this electrical component. If you use the 74HC195 family, you can find parts that are similar. As noted, this chip operates within the range of 5V. There should be no less than 2V supply voltage (Vsup) for this part. In the device, there are 6 input lines. The maximum supply voltage (Vsup) for this part should not be more than 6V. 50MHz is the frequency of the device.
CD74HC195PWT Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC195 family
Operate supply voltage at 5V
CD74HC195PWT Applications
There are a lot of Texas Instruments CD74HC195PWT Shift Registers applications.
- Pattern Recognizers
- Data Processors
- Counter
- Interconnectors
- Sequence generator
- LED matrix control
- ROM Chips
- data transfer
- store data in digital form
- Serial-to-parallel data conversion