CD74HC195PWRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 265 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Number of Bits per Element | 4 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 6 |
| fmax-Min | 23 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
CD74HC195PWRE4 Overview
TSSOP is a package containing the embedded device. It sums up to 16 where the chip's terminations add up. The Tape & Reel (TR) case contains it. Parts with a 4.5V operating supply voltage are specified. It is a part that has 1 elements on it. Devices with 16 pins are available. It is recommended to mount by Surface Mount. The electronic component belongs to the HC/UH. It is noted that the operating supply voltage of this chip falls within the range 5V. This section has the following additional features: COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT. In the device, there are 6 input lines that are available for use. In total, there are 16 pins on it. It is recommended that it be used at temperatures below 125°C. Operation of this device requires a value greater than -55°C. Under 6V, this voltage is employed. There is a voltage applied to the supply that is greater than 2V.
CD74HC195PWRE4 Features
With 16 pins
Operate supply voltage at 5V
CD74HC195PWRE4 Applications
There are a lot of Texas Instruments CD74HC195PWRE4 Shift Registers applications.
- ROM Chips
- Remote control holding register
- Dual-rank shift, hold, and bus applications
- Pulse Extenders
- Interconnectors
- Cache memory in CPU
- data transfer
- Flash Memory
- Parallel to serial converter
- Remote control holding register