CD74HC195PWE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 265 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Number of Bits per Element | 4 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 6 |
| fmax-Min | 23 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
CD74HC195PWE4 Overview
TSSOP package contains the device. A total of 16 terminations can be found on the chip. Its operating supply voltage is rated at 4.5V. On this part, there are 1 elements. The device is equipped with 16 pins. Surface Mount is recommended for mounting. In the HC/UH series, the electronic component belongs. According to the specification, this chip's operating supply voltage falls within the range of 5V. Taking note of the following additional details: COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT. In the device, there are 6 input lines that are available for use. In total, it has 16 pins. Under temperatures below 125°C, it is recommended to use it. For this device to operate, it cannot be lower than -55°C. We use this supply voltage under 6V. This supply voltage is employed higher than 2V.
CD74HC195PWE4 Features
With 16 pins
Operate supply voltage at 5V
CD74HC195PWE4 Applications
There are a lot of Texas Instruments CD74HC195PWE4 Shift Registers applications.
- Dual-rank shift, hold, and bus applications
- Data Format Converters
- 7-segment display control
- Data Processors
- Generate time delay toward digital circuits
- Pseudo Random Pattern Generator
- Remote control holding register
- Data manipulation
- Parallel to serial converter
- temporary data storage