CD74HC195MG4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Propagation Delay | 30 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 265 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Number of Bits per Element | 4 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 6 |
| fmax-Min | 23 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Height | 1.58mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74HC195MG4 Overview
This device can be found embedded within the package SOIC. 16 is the sum of the number of terminations in the chip. Parts with a 4.5V operating supply voltage are specified. The part consists of 1 elements. The device is equipped with 16 pins. The recommended mounting method is Surface Mount. There is an electronic component in the HC/UH. As noted, this chip operates within the range of 5V. There are also the following additional considerations in this section: COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT. In the device, there are 6 input lines that are available for use. The pin count is 16. This product should not be used at temperatures above 125°C. This device should not be operated with a value lower than -55°C. We use this supply voltage under 6V. The supply voltage is higher than 2V. 8μA is the quiescent current.
CD74HC195MG4 Features
With 16 pins
Operate supply voltage at 5V
Quiescent Current at 8μA
CD74HC195MG4 Applications
There are a lot of Texas Instruments CD74HC195MG4 Shift Registers applications.
- Remote control holding register
- store data in digital form
- Flash Memory
- Data Processors
- ROM Chips
- Dual-rank shift, hold, and bus applications
- Pseudo Random Pattern Generator
- Output expansion
- Interconnectors
- Pattern Recognizers