CD74HC195M96E4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 265 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Number of Bits per Element | 4 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 6 |
| fmax-Min | 23 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
CD74HC195M96E4 Overview
SOIC is a package containing the embedded device. A total of 16 terminations can be found on the chip. The case Tape & Reel (TR) contains it. Parts with a 4.5V operating supply voltage are specified. 1 elements are present in this part. There are 16 pins on the device. It is recommended that the mount should be done by Surface Mount. Electronic components are categorized as HC/UH. A range of 5V is noted as the operating supply voltage of this chip. Additionally, this section contains the following: COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT. The device has a total of 6 input lines. The total number of pins is 16. Under 125°C, it is recommended that it be used. This device should not be operated with a value lower than -55°C. We use this supply voltage under 6V. This supply voltage is employed higher than 2V.
CD74HC195M96E4 Features
With 16 pins
Operate supply voltage at 5V
CD74HC195M96E4 Applications
There are a lot of Texas Instruments CD74HC195M96E4 Shift Registers applications.
- ROM Chips
- store data in digital form
- Flash Memory
- Remote control holding register
- temporary data storage
- Pulse Extenders
- Pattern Recognizers
- Counter
- LED matrix control
- Data Format Converters