CD74HC195E
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Supply Voltage | 4.5V |
| Frequency | 50MHz |
| Base Part Number | 74HC195 |
| Function | Universal |
| Output Type | Complementary |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 265 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 265 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Register, Bidirectional |
| Output Polarity | TRUE |
| Max I(ol) | 0.0052 A |
| Prop. Delay@Nom-Sup | 37 ns |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.08mA |
| Number of Input Lines | 6 |
| fmax-Min | 23 MHz |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC195E Overview
Embedded in a package of type 16-DIP (0.300, 7.62mm), the device is available for use. This chip has a total termination count of 16. The case Tube contains it. Its operating supply voltage is rated at 4.5V. A total of 1 elements are present on this part. 16 pins are located on the device. Using Through Hole as a mount point is recommended. It is a component of the HC/UH. Through Hole is the way this component is mounted. The operating temperature ranges -55°C~125°C. There is a voltage supply within 2V~6V. In the 74HC series, this electrical component is found. Similar parts can be found using the 74HC195 family. It is noted that the operating supply voltage of this chip falls within the range 5V. For this part, the minimum supply voltage (Vsup) should not be less than 2V. The device has a total of 6 input lines. In this part, the maximum supply voltage (Vsup) should not exceed 6V. The total number of IC chip bits is 4. A quiescent current of 8μA is used to run the device. The device runs its frequency at 50MHz.
CD74HC195E Features
With 16 pins
Mounted in Through Hole type.
Based on 74HC195 family
Operate supply voltage at 5V
Quiescent Current at 8μA
CD74HC195E Applications
There are a lot of Texas Instruments CD74HC195E Shift Registers applications.
- Data manipulation
- ROM Chips
- Sequence generator
- Serial-to-parallel data conversion
- Counter
- 8-bit data storage
- Remote control holding register
- Serial-to-parallel data conversion
- Parallel data
- data manipulation