CD74HC194PWTE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | HOLD MODE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 265 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Number of Bits per Element | 4 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 6 |
| fmax-Min | 23 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
CD74HC194PWTE4 Overview
The device is embedded in TSSOP package. 16 is the number of terminations on the chip. Presented in a case of Tape & Reel (TR). 4.5V is the part's operating supply voltage. There are 1 elements on this part. 16 pins are present on the device. The recommended mounting method is Surface Mount. An electronic component is included in the HC/UH. In terms of supply voltage, this chip operates within the range of 5V. There are also the following additional considerations in this section: HOLD MODE. There are 6 input lines available in the device. It has a total of zero pins. Under 125°C, it is recommended that it be used. Ideally, it should not fall below -55°C. 6V is the supply voltage used. A voltage higher than 2V is used as a supply voltage.
CD74HC194PWTE4 Features
With 16 pins
Operate supply voltage at 5V
CD74HC194PWTE4 Applications
There are a lot of Texas Instruments CD74HC194PWTE4 Shift Registers applications.
- Sequence generator
- data transfer
- Remote control holding register
- Cache memory in CPU
- Flash Memory
- 8-bit data storage
- 7-segment display control
- store data in digital form
- Data Processors
- Counter