CD74HC194PWE4
| Parameters | |
|---|---|
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 265 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Number of Bits per Element | 4 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 6 |
| fmax-Min | 23 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | HOLD MODE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
CD74HC194PWE4 Overview
There is an embedded device in the package TSSOP. The number of the chip's terminations sums up to 16. Presented in a case of Rail/Tube. The part operates at 4.5V voltage. A total of 1 elements can be found on this part. It has 16 pins. It is recommended that the mount should be done by Surface Mount. Electronic components fall under the category of HC/UH. As noted, this chip operates within the range of 5V. Additional aspects of this section include: HOLD MODE. As far as the device is concerned, there are 6 input lines available. It has a total of 16 pins. It is recommended that it be used at temperatures below 125°C. Ideally, it should not fall below -55°C. 6V is the supply voltage used. It is used at a higher voltage than 2V.
CD74HC194PWE4 Features
With 16 pins
Operate supply voltage at 5V
CD74HC194PWE4 Applications
There are a lot of Texas Instruments CD74HC194PWE4 Shift Registers applications.
- Delay Line
- Remote control holding register
- Output expansion
- ROM Chips
- Serial to parallel converter
- LED matrix control
- Dual-rank shift, hold, and bus applications
- Pulse Extenders
- Interconnectors
- store data in digital form