CD74HC194MT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | HOLD MODE |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 4.5V |
| Frequency | 60MHz |
| Base Part Number | 74HC194 |
| Function | Universal |
| Output Type | Push-Pull |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 265 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Logic Type | Register, Bidirectional |
| Output Polarity | TRUE |
| Number of Bits per Element | 4 |
| Trigger Type | POSITIVE EDGE |
| Max Input Current | 160μA |
| Number of Input Lines | 6 |
| fmax-Min | 23 MHz |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
CD74HC194MT Overview
There is a 16-SOIC (0.154, 3.90mm Width) package embedded with the device. The number of the chip's terminations sums up to 16. This item is packed in case Tape & Reel (TR). The part operates at 4.5V voltage. A total of 1 elements can be found on this part. Devices with 16 pins are available. It is recommended that the mount should be done by Surface Mount. There is an electronic component in the HC/UH. Mounted in the same way as Surface Mount. -55°C~125°C is the range of operating temperatures for the device. It is supplied with voltage within 2V~6V. In this case, the electrical component belongs to the series 74HC. With 74HC194 family search, you can find similar parts. A range of 5V is noted as the operating supply voltage of this chip. There are also the following additional considerations in this section: HOLD MODE. For this part, the minimum supply voltage (Vsup) should not be less than 2V. The device has a total of 6 input lines. It should not exceed 6V in terms of the supply voltage (Vsup). The device runs its frequency at 60MHz.
CD74HC194MT Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC194 family
Operate supply voltage at 5V
CD74HC194MT Applications
There are a lot of Texas Instruments CD74HC194MT Shift Registers applications.
- 8-bit data storage
- ROM Chips
- LED matrix control
- Serial-to-parallel data conversion
- Counter
- temporary data storage
- Pattern Recognizers
- Parallel to serial converter
- Data Format Converters
- Interconnectors