CD74HC193M96
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Additional Feature | TCO UP AND TCO DOWN OUTPUTS; SEPARATE UP/DOWN CLOCK |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Frequency | 29MHz |
| Base Part Number | 74HC193 |
| Pin Count | 16 |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 330 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 330 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up, Down |
| Logic Type | Binary Counter |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 4 |
| Trigger Type | Positive Edge |
| Power Supply Current-Max (ICC) | 0.08mA |
| fmax-Min | 20 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Timing | Synchronous |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC193M96 Overview
It is a device supplied in the 16-SOIC (0.154, 3.90mm Width) package. In order to configure it, it uses 16terminations. Having a supply voltage of 4.5V enables to operate in a fully flexible manner. In wires, 1elements are connected. All component pins are equal to 16. Packaging is based on Tape & Reel (TR). There are 16 pins going on to connect other parts in the circuit. To mount it, use the method of [0]. It is included in the HC/UHfamily. This device is a member of the 74HCseries and is well suited for a wide range of applications. Logic type Binary Counter is adopted. It is recommended that the operating temperature be set to -55°C~125°C. This device is mounted in a Surface Mountmanner. In the presence of the supply voltage of [0], it can operate more reliably. The array contains elements that store 4bits each. Using the Pbfree code, the result may be yes. A major feature of this electronic device is its [0]. Further related parts may be found under the base part number 74HC193. In order to pack the product, TRis employed. As a result of the voltage source, there is 2/6V voltage. The minimum supply voltage (Vsup) is as low as 2V. It operates at a frequency of 29MHz Hz. Up to a maximum voltage of 6Vcan be supplied (Vsup). Quiescent current is consumed at 8μA.
CD74HC193M96 Features
Embedded in the 16-SOIC (0.154, 3.90mm Width) package
4 bits per element
TCO UP AND TCO DOWN OUTPUTS; SEPARATE UP/DOWN CLOCK
Frequency of 29MHz
CD74HC193M96 Applications
There are a lot of Texas Instruments CD74HC193M96 Counters & Dividers applications.
- Up Counters
- Counter control/timers
- SQUARE ROOT
- Analog multiplexing and demultiplexing
- Frequency division
- Time Out Timer for Consumer-Application Industrial Controls
- Timers
- counting/frequency sy nthesizers-BCD output
- Binary counter/decoder
- Time-delay circuits