CD74HC166ME4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Subcategory | Shift Registers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 27 ns |
| Turn On Delay Time | 240 ns |
| Family | HC/UH |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 9 |
| fmax-Min | 23 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
CD74HC166ME4 Overview
Embedded in a package of type SOIC, the device is available for use. 16 is the sum of the number of terminations in the chip. The Rail/Tube case contains it. 4.5V is the operating supply voltage of the part. The part consists of 1 elements. The device is equipped with 16 pins. Using Surface Mount as a mount point is recommended. Electronic components belong to the HC/UH group. The operating supply voltage of this chip is noted to be within the range 5V. Additionally, please note the following: SISO OPERATION ALSO AVAILABLE. 9 input lines are available on the device. The total number of IC chip bits is 8. The total number of pins is 16. Under temperatures below 125°C, it is recommended to use it. It should not be lower than -55°C to operate this device. It is used under the 6V supply voltage. There is a voltage applied to the supply that is greater than 2V. Its subcategory belongs to Shift Registers.
CD74HC166ME4 Features
With 16 pins
Operate supply voltage at 5V
CD74HC166ME4 Applications
There are a lot of Texas Instruments CD74HC166ME4 Shift Registers applications.
- data manipulation
- Remote control holding register
- Parallel data
- Parallel to serial converter
- ROM Chips
- Pseudo Random Pattern Generator
- Remote control holding register
- Pulse Extenders
- Data Processors
- 8-bit data storage