CD74HC165M96G4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC165 |
| Function | Parallel or Serial to Serial |
| Output Type | Complementary |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 28 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 265 ns |
| Family | HC/UH |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 8 |
| Prop. Delay@Nom-Sup | 32 ns |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Number of Input Lines | 9 |
| fmax-Min | 24 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC165M96G4 Overview
In package 16-SOIC (0.154, 3.90mm Width), there is an embedded device. 16 is the number of terminations on the chip. A Tape & Reel (TR) case holds it. 4.5V is the part's operating supply voltage. On this part, there are 1 elements. The device is equipped with 16 pins. Using Surface Mount as a mount point is recommended. The electronic component belongs to the HC/UH. As you can see, this component is mounted in the way of Surface Mount. -55°C~125°C is the range of operating temperatures for the device. It is supplied with voltage within 2V~6V. This electrical component belongs to the 74HC series. By using the 74HC165 family, you can find similar parts. As noted, this chip operates within the range of 5V. This section has the following additional features: SISO OPERATION ALSO AVAILABLE. This part must have a minimum supply voltage (Vsup) of 2V. The device has a total of 9 input lines. A voltage of 2/6V is possible with this device. The maximum supply voltage (Vsup) for this part should not be more than 6V. It runs on a quiescent current of 8μA. TR is the way the part is packaged.
CD74HC165M96G4 Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC165 family
Operate supply voltage at 5V
It supplies 2/6V power
Quiescent Current at 8μA
Packing Method : TR
CD74HC165M96G4 Applications
There are a lot of Texas Instruments CD74HC165M96G4 Shift Registers applications.
- Pulse Extenders
- temporary data storage
- Data Processors
- Output expansion
- LED matrix control
- Interconnectors
- Sequence generator
- Remote control holding register
- Flash Memory
- 8-bit data storage