CD74HC164MT
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Termination | SMD/SMT |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 4.5V |
| Frequency | 60MHz |
| Base Part Number | 74HC164 |
| Function | Serial to Parallel |
| Output Type | Push-Pull |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 29 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 255 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Max Input Current | 160μA |
| Schmitt Trigger | No |
| Number of Input Lines | 2 |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC164MT Overview
As a result, 14-SOIC (0.154, 3.90mm Width) package contains the embedded device. This chip has a total termination count of 14. There is a Tape & Reel (TR) case containing it. This part has an operating supply voltage of 4.5V. 1 elements are present in this part. 14 pins are located on the device. As a general recommendation, mounting by Surface Mount is recommended. The electronic component belongs to the HC/UH. Mounted in the same way as Surface Mount. There is a range of operating temperatures -55°C~125°C. Votage within 2V~6V is supplied. Similar parts can be found using the 74HC family. Similar parts can be found using the 74HC164 family. There should be no less than 2V supply voltage (Vsup) for this part. A device with 2 input lines is available. Ideally, the maximum supply voltage (Vsup) should not exceed 6V. It runs on a quiescent current of 8μA. There is a TR package for the part. The device runs at 60MHz.
CD74HC164MT Features
With 14 pins
Mounted in Surface Mount type.
Based on 74HC164 family
Quiescent Current at 8μA
Packing Method : TR
CD74HC164MT Applications
There are a lot of Texas Instruments CD74HC164MT Shift Registers applications.
- Serial-to-parallel data conversion
- Remote control holding register
- ROM Chips
- Data Format Converters
- Interconnectors
- Output expansion
- Data manipulation
- Counter
- Cache memory in CPU
- Remote control holding register