CD74HC164M
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 4.5V |
| Frequency | 60MHz |
| Base Part Number | 74HC164 |
| Function | Serial to Parallel |
| Output Type | Push-Pull |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 29 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 255 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Gates | 1 |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Number of Input Lines | 2 |
| Input Current | 1μA |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC164M Overview
In package 14-SOIC (0.154, 3.90mm Width), there is an embedded device. 14 is the total number of terminations on the chip. It is used to pack in Tube case. This part has an operating supply voltage of 4.5V. 14 pins are provided on the device. The recommended mounting method is Surface Mount. Electronic components fall under the category of HC/UH. In Surface Mount, this component is mounted. There is a temperature range of -55°C~125°C. There is a votage of 2V~6V provided with it. In the 74HC series, this electrical component is found. Similar parts can be found by searching for the 74HC164 family. There must be a minimum supply voltage (Vsup) of 2V for this part. The device has 2 input lines. A maximum supply voltage (Vsup) of 6V may be applied to this part. A quiescent current of 8μA is used to run the device. 60MHz is the device's frequency.
CD74HC164M Features
With 14 pins
Mounted in Surface Mount type.
Based on 74HC164 family
Quiescent Current at 8μA
CD74HC164M Applications
There are a lot of Texas Instruments CD74HC164M Shift Registers applications.
- Serial-to-parallel data conversion
- Data Processors
- data transfer
- Remote control holding register
- temporary data storage
- Delay Line
- Parallel data
- Generate time delay toward digital circuits
- Output expansion
- store data in digital form