CD74HC164E
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 927.99329mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Supply Voltage | 4.5V |
| Frequency | 60MHz |
| Base Part Number | 74HC164 |
| Function | Serial to Parallel |
| Output Type | Push-Pull |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 255 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 255 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Number of Input Lines | 2 |
| Input Current | 1μA |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC164E Overview
In package 14-DIP (0.300, 7.62mm), there is an embedded device. 14 is the sum of the number of terminations in the chip. It is used to pack in Tube case. A voltage of 4.5V is specified for the part's operating supply. On this part, there are 1 elements. 14 pins are located on the device. Through Hole is recommended for mounting. In this case, the electronic component belongs to the HC/UH. Through Hole is the way this component is mounted. -55°C~125°C is the range of operating temperatures for the device. It is supplied with voltage within 2V~6V. The 74HC series is associated with this electrical component. Similar parts can be found by searching for the 74HC164 family. There should be no less than 2V supply voltage (Vsup) for this part. A device with 2 input lines is available. A maximum supply voltage (Vsup) of 6V may be applied to this part. There is a quiescent current of 8μA running through it. 60MHz is the frequency of the device.
CD74HC164E Features
With 14 pins
Mounted in Through Hole type.
Based on 74HC164 family
Quiescent Current at 8μA
CD74HC164E Applications
There are a lot of Texas Instruments CD74HC164E Shift Registers applications.
- 7-segment display control
- Data Processors
- temporary data storage
- ROM Chips
- 8-bit data storage
- Remote control holding register
- data transfer
- Output expansion
- Delay Line
- Interconnectors