CD74ACT74M96
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74ACT74 |
| Function | Set(Preset) and Reset |
| Number of Outputs | 4 |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Clock Frequency | 85MHz |
| Propagation Delay | 12.5 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 2.4 ns |
| Family | ACT |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 9.5ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 9.5 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 1 |
| fmax-Min | 85 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 85000000Hz |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74ACT74M96 Overview
In the form of 14-SOIC (0.154, 3.90mm Width), it has been packaged. Package Cut Tape (CT)embeds it. This output is configured with Differential. It is configured with the trigger Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A 4.5V~5.5Vsupply voltage is required for it to operate. -55°C~125°C TAis the operating temperature. There is D-Type type of electronic flip flop associated with this device. JK flip flop is a part of the 74ACTseries of FPGAs. A frequency of 85MHzshould be the maximum output frequency. There are 14 terminations,D latch belongs to the 74ACT74 family. A voltage of 5V is used as the power supply for this D latch. A JK flip flop with a 10pFfarad input capacitance is used here. Devices in the ACTfamily are electronic devices. This electronic part is mounted in the way of Surface Mount. With its 14pins, it is designed to work with most electronic flip flops. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. The part is included in FF/Latches. Due to its superior flexibility, it uses 2 circuits. In view of its reliability, this D flip flop is a good fit for TR. An electrical current of 5V volts is applied to it. For high efficiency, the supply voltage should be kept at 5V. Featuring the maximum design flexibility, it has an output current of 24mA . It has 1 output lines to operate. There is a consumption of 4μAof quiescent current from it.
CD74ACT74M96 Features
Cut Tape (CT) package
74ACT series
14 pins
5V power supplies
CD74ACT74M96 Applications
There are a lot of Texas Instruments CD74ACT74M96 Flip Flops applications.
- Counters
- Single Up Count-Control Line
- Frequency division
- Convert a momentary switch to a toggle switch
- Divide a clock signal by 2 or 4
- Bus hold
- Individual Asynchronous Resets
- Shift registers
- Asynchronous counter
- Functionally equivalent to the MC10/100EL29