CD74ACT299M96E4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.000539mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Propagation Delay | 12.9 ns |
| Turn On Delay Time | 18.6 ns |
| Family | ACT |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 10 |
| fmax-Min | 90 MHz |
| Max Frequency@Nom-Sup | 90000000Hz |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
CD74ACT299M96E4 Overview
There is a SOIC package embedded with the device. Taking the total number of terminations on the chip and adding them up, we get 20. Presented in a case of Tape and Reel. Voltage rating of the part is 5V. 20 pins are located on the device. Using Surface Mount as a mount point is recommended. This electronic component is classified as ACT. It is noted that this chip uses an operating supply voltage of 5V. Additionally, this section contains the following: HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL. In the device, there are 10 input lines. Voltage can be delivered at 5V by the device. It has 8 bits in total. It has a total of 20 pins. Under temperatures below 125°C, it is recommended to use it. For this device to operate, it cannot be lower than -55°C. It is employed under the condition of 5.5V. This supply voltage is employed higher than 4.5V. An electronic device such as this one has 1 circuits in it.
CD74ACT299M96E4 Features
With 20 pins
Operate supply voltage at 5V
It supplies 5V power
CD74ACT299M96E4 Applications
There are a lot of Texas Instruments CD74ACT299M96E4 Shift Registers applications.
- Parallel data
- Flash Memory
- ROM Chips
- Pseudo Random Pattern Generator
- Dual-rank shift, hold, and bus applications
- Data Processors
- Data Format Converters
- Interconnectors
- Serial-to-parallel data conversion
- 7-segment display control