CD74ACT175MG4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 114MHz |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Current - Output | 24mA |
| Propagation Delay | 11.5 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 2.9 ns |
| Family | ACT |
| Logic Function | D-Type, Flip-Flop |
| Logic IC Type | D FLIP-FLOP |
| Number of Bits per Element | 4 |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.58mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74ACT175MG4 Overview
The flip flop is packaged in a case of SOIC. In total, it contains 1 elements. Terminations are 16. A voltage of 5V is used as the power supply for this D latch. ACTis the family of this D flip flop. It is mounted in the way of Surface Mount. Basically, it is designed with a set of 16 pins. This device's clock edge trigger type is Positive Edge. This RS flip flops is a part number FF/Latches. The power supply is 5V. If high efficiency is desired, the supply voltage should be kept at 5V. As a result, it consumes 8μA of quiescent current without being affected by external factors. -24mA is set as the high level output current. The low level output current is set to 24mA. There should be a temperature below 125°Cduring operation. Temperatures above -55°Cshould be used. A minimum supply voltage of 4.5V is required for these RS flip flops to operate. There is a maximum supply voltage of 5.5V. It is possible to achieve a frequency of 114MHz. The logic IC it adopts is D FLIP-FLOP. It is equipped with 1 Functions . It has 16 pins. It features maximum design flexibility due to the 24mA output current.
CD74ACT175MG4 Features
16 pins
5V power supplies
1 Functions
16 pin count
CD74ACT175MG4 Applications
There are a lot of Texas Instruments CD74ACT175MG4 Flip Flops applications.
- ESCC
- Cold spare funcion
- Memory
- Reduced system switching noise
- Asynchronous counter
- Test & Measurement
- Storage registers
- Data storage
- Balanced Propagation Delays
- Dynamic threshold performance