CD74ACT175E
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Clock Frequency | 114MHz |
| Family | ACT |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 11.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Height Seated (Max) | 5.33mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
CD74ACT175E Overview
It is packaged in the way of 16-DIP (0.300, 7.62mm). D flip flop is embedded in the Tube package. In the configuration, Differentialis used as the output. This trigger is configured to use Positive Edge. Through Holemounts this electrical part. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. It is operating at -55°C~125°C TA. It is an electronic flip flop with the type D-Type. It belongs to the 74ACTseries of FPGAs. It should not exceed 114MHzin terms of its output frequency. The list contains 1 elements. As a result, it consumes 8μA quiescent current. It has been determined that there have been 16 terminations. Power is supplied from a voltage of 5V volts. Its input capacitance is 10pF farads. An electronic device belonging to the family ACTcan be found here. Vsup reaches 5.5V, the maximal supply voltage.
CD74ACT175E Features
Tube package
74ACT series
CD74ACT175E Applications
There are a lot of Rochester Electronics, LLC CD74ACT175E Flip Flops applications.
- Data transfer
- Instrumentation
- Single Up Count-Control Line
- Convert a momentary switch to a toggle switch
- ATE
- Individual Asynchronous Resets
- Frequency Dividers
- Bus hold
- Memory
- Count Modes