CD74AC74M96E4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latch |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AC74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Clock Frequency | 110MHz |
| Propagation Delay | 125 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 2.5 ns |
| Family | AC |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 90000000Hz |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74AC74M96E4 Overview
It is embeded in 14-SOIC (0.154, 3.90mm Width) case. You can find it in the Tape & Reel (TR)package. T flip flop uses Differentialas its output configuration. There is a trigger configured with Positive Edge. Surface Mountis positioned in the way of this electronic part. It operates with a supply voltage of 1.5V~5.5V. It is operating at a temperature of -55°C~125°C TA. This electronic flip flop is of type D-Type. FPGAs belonging to the 74ACseries contain this type of chip. Its output frequency should not exceed 110MHz Hz. Terminations are 14. It is a member of the 74AC74 family. A voltage of 3.3V is used to power it. Its input capacitance is 10pFfarads. A device of this type belongs to the family of AC. A part of the electronic system is mounted in the way of Surface Mount. A total of 14pins are provided on this board. A Positive Edgeclock edge trigger is used in this device. It is part of the FF/Latchbase part number family. Vsup reaches its maximum value at 5.5V. The superior flexibility is achieved through the use of 2 circuits. Considering its reliability, this T flip flop is well suited for TR. The system runs on a power supply of 3.3/5V watts. As a result of its output current of 24mA, it is very flexible in terms of design. In order to operate, the chip has 1 output lines. This D latch consumes 4μA quiescent current at all.
CD74AC74M96E4 Features
Tape & Reel (TR) package
74AC series
14 pins
3.3/5V power supplies
CD74AC74M96E4 Applications
There are a lot of Texas Instruments CD74AC74M96E4 Flip Flops applications.
- Shift Registers
- Registers
- ESCC
- Asynchronous counter
- Control circuits
- Event Detectors
- Data Synchronizers
- Memory
- Automotive
- Frequency division