CD74AC323MG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.000539mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Temperature Grade | MILITARY |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.5V |
| Number of Bits | 8 |
| Propagation Delay | 12.9 ns |
| Turn On Delay Time | 186 ns |
| Family | AC |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 10 |
| fmax-Min | 95 MHz |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
CD74AC323MG4 Overview
As a result, SOIC package contains the embedded device. It sums up to 20 where the chip's terminations add up. A Rail/Tube case is used to pack it. The part operates at 3.3V voltage. The device is equipped with 20 pins. The mounting method should be Surface Mount. Electronic components belong to the AC group. It's noted that the chip's operating supply voltage is in the range 5V. The following additional aspects of this section are worth noting: HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL. The device has 10 input lines. The total number of IC chip bits is 8. In total, it has 20 pins. Using it below 125°C is recommended. In order to operate the device, the value should not fall below -55°C. Under 5.5V, this supply voltage is employed. It is used at a voltage greater than 1.5V. 1 circuits are present in this device.
CD74AC323MG4 Features
With 20 pins
Operate supply voltage at 5V
CD74AC323MG4 Applications
There are a lot of Texas Instruments CD74AC323MG4 Shift Registers applications.
- Pattern Recognizers
- Cache memory in CPU
- data transfer
- Parallel to serial converter
- 8-bit data storage
- Output expansion
- Parallel data
- 7-segment display control
- Pseudo Random Pattern Generator
- Serial-to-parallel data conversion