CD74AC299M96G4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.000539mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Temperature Grade | MILITARY |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.5V |
| Number of Bits | 8 |
| Propagation Delay | 12.9 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 186 ns |
| Family | AC |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 10 |
| fmax-Min | 95 MHz |
| Height | 2.35mm |
| Length | 12.8mm |
| Width | 7.52mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74AC299M96G4 Overview
SOIC is the package in which the device is embedded. A total of 20 terminations can be found on the chip. There is 3.3V operating supply voltage listed on the part. Devices with 20 pins are available. Surface Mount is recommended for mounting. An electronic component is included in the AC. It is noted that the operating supply voltage of this chip falls within the range 5V. Additionally, please note the following: HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL. 10 input lines are available on the device. There are 8 bits in the IC chip. There are a total of 20 pins on it. At temperatures below 125°C, it is recommended for use. For this device to operate, it cannot be lower than -55°C. A voltage of 5.5V is used to supply this voltage. It is used at a higher voltage than 1.5V. There is a quiescent current of 8μA flowing through it. In this device, there are 1 circuits.
CD74AC299M96G4 Features
With 20 pins
Operate supply voltage at 5V
Quiescent Current at 8μA
CD74AC299M96G4 Applications
There are a lot of Texas Instruments CD74AC299M96G4 Shift Registers applications.
- Delay Line
- Parallel data
- Pseudo Random Pattern Generator
- 8-bit data storage
- Serial-to-parallel data conversion
- Pulse Extenders
- Sequence generator
- Serial-to-parallel data conversion
- Pattern Recognizers
- Remote control holding register