CD54HC194F3A
| Parameters | |
|---|---|
| Thickness | 4.57mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Package / Case | CDIP |
| Number of Pins | 16 |
| Packaging | Rail/Tube |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | HOLD MODE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 265 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 265 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Max I(ol) | 0.0052 A |
| Prop. Delay@Nom-Sup | 37 ns |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.08mA |
| fmax-Min | 23 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Height | 5.08mm |
| Length | 19.56mm |
| Width | 6.92mm |
CD54HC194F3A Overview
This device can be found embedded within the package CDIP. Chip terminations add up to 16. The Rail/Tube case contains it. 4.5V is the operating supply voltage of the part. There are 1 elements on this part. In this device, there are 16 pins. Through Hole is recommended for mounting. This electronic component is classified as HC/UH. This section has the following additional features: HOLD MODE. The total number of IC chip bits is 4. 16 pins are on it. Under 125°C, it is recommended that it be used. This device should not be operated with a value lower than -55°C. A voltage of 6V is employed as the supply voltage. Voltages higher than 2V are used for this supply. A quiescent current of 8μA is used.
CD54HC194F3A Features
With 16 pins
Quiescent Current at 8μA
CD54HC194F3A Applications
There are a lot of Texas Instruments CD54HC194F3A Shift Registers applications.
- data transfer
- Pattern Recognizers
- Remote control holding register
- Serial-to-parallel data conversion
- Generate time delay toward digital circuits
- LED matrix control
- Cache memory in CPU
- 8-bit data storage
- Parallel data
- Flash Memory