CD4094BPWRG4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | COMPLIMENTARY SERIAL OUTPUT ALSO AVAILABLE |
| Subcategory | Shift Registers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Number of Bits | 8 |
| Propagation Delay | 840 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 840 ns |
| Logic Function | Latch, Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 10 |
| fmax-Min | 3 MHz |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD4094BPWRG4 Overview
TSSOP is a package containing the embedded device. This chip has a total termination count of 16. A Tape and Reel case holds it. The part operates at 5V voltage. The part consists of 1 elements. It has 16 pins. Mounting by Surface Mount is recommended. It is noted that the operating supply voltage of this chip falls within the range 15V. The following additional aspects of this section are worth noting: COMPLIMENTARY SERIAL OUTPUT ALSO AVAILABLE. There are 8 bits in the IC chip. This board has 16 pins in total. It should be used below 125°C. Ideally, it should not fall below -55°C. We use this supply voltage under 18V. It is used at a voltage greater than 3V. A total of 10 output lines are available for operation. The current is 100μA during quiescent operation. Shift Registers is its subcategory.
CD4094BPWRG4 Features
With 16 pins
Operate supply voltage at 15V
With 10 output lines
Quiescent Current at 100μA
CD4094BPWRG4 Applications
There are a lot of Texas Instruments CD4094BPWRG4 Shift Registers applications.
- Sequence generator
- Interconnectors
- Output expansion
- data manipulation
- Flash Memory
- Serial-to-parallel data conversion
- Serial-to-parallel data conversion
- data transfer
- temporary data storage
- Data Processors