CD4094BEE4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | COMPLIMENTARY SERIAL OUTPUT ALSO AVAILABLE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 190 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 840 ns |
| Logic Function | Latch, Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Prop. Delay@Nom-Sup | 250 ns |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.3mA |
| Number of Output Lines | 10 |
| fmax-Min | 3 MHz |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD4094BEE4 Overview
Embedded in a package of type PDIP, the device is available for use. Chip terminations add up to 16. A Rail/Tube case holds it. 5V is the operating supply voltage of the part. A total of 1 elements can be found on this part. It is equipped with a pin count of 16. As a general recommendation, mounting by Through Hole is recommended. According to the specification, this chip's operating supply voltage falls within the range of 15V. The following additional elements are important to note: COMPLIMENTARY SERIAL OUTPUT ALSO AVAILABLE. The total number of IC chip bits is 8. The pin count is 16. It should be used below 125°C. For this device to work, it should not go below -55°C. We use this supply voltage under 18V. The supply voltage is higher than 3V. It is necessary to operate 10 output lines. A quiescent current of 100μA is used.
CD4094BEE4 Features
With 16 pins
Operate supply voltage at 15V
With 10 output lines
Quiescent Current at 100μA
CD4094BEE4 Applications
There are a lot of Texas Instruments CD4094BEE4 Shift Registers applications.
- Generate time delay toward digital circuits
- Delay Line
- store data in digital form
- 8-bit data storage
- Dual-rank shift, hold, and bus applications
- temporary data storage
- Pattern Recognizers
- Pulse Extenders
- Parallel data
- Serial to parallel converter