CD4067BM96E4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Resistance | 240Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CD4067 |
| Output | SEPARATE OUTPUT |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 80nA |
| Nominal Supply Current | 100μA |
| Power Dissipation | 500mW |
| Number of Bits | 16 |
| Propagation Delay | 60 ns |
| Turn On Delay Time | 650 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| Bandwidth | 14MHz |
| Supply Current-Max (Isup) | 0.6mA |
| Turn-Off Delay Time | 440 ns |
| On-State Resistance (Max) | 240Ohm |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 0.2pF 55pF |
| On-state Resistance Match-Nom | 15Ohm |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 3V~18V |
| Normal Position | NO |
| Signal Current-Max | 0.025A |
| Height | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4067BM96E4 Overview
This electronic part is conveniently packaged in 24-SOIC (0.295, 7.50mm Width), making it easy to ship abroad. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 16:1. Extended operating temperature around -55°C~125°C TA. 24 terminations have been made so far. As a result of its 1 channels, this electronic component provides high-quality output. A 5V voltage supply should turn on and run the electronic component. As part of the design of the 24 series, this electronic part has been incorporated into the system. A total of 1 circuits make up this switch device. Try searching for the analog switch ic with CD4067 if you are looking for variants. An switch multiplexer with 240Ohm internal resistance has a value of 240Ohm. The datasheets for the 24 pins explain the functions. In this analog multiplexer, the value is Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 18V. A analog switch ic that has a cost-effective Single supply type. In order for the electronic part to function properly, the lowest voltage should be 3V. 80nA current would be enough for this multiplexer to operate. A voltage of 3V~18V is required to drain this analog switch from a single voltage supply. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. The data can be transferred over a wide range of bandwidths, called 14MHz bandwidths. It is able to conduct in a 16-bit way.
CD4067BM96E4 Features
1 Channels
80nA Supply Current
Bandwidth: 14MHz
16-Bit
CD4067BM96E4 Applications
There are a lot of Texas Instruments CD4067BM96E4 Analog Switches & Multiplexers ICs applications.
- Multiplexers
- Power routing
- Avionics
- Digital access cross connects
- Communication systems
- Cross Connects
- Digital Cross-Connects
- Data Acquisition Systems
- Fiber to the Home
- Medical systems