CD4035BNSRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Additional Feature | J AND K BAR SERIAL INPUT |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CD4035 |
| Function | Parallel or Serial to Serial |
| Qualification Status | Not Qualified |
| Output Type | Complementary |
| Operating Supply Voltage | 15V |
| Number of Elements | 1 |
| Supply Voltage-Min (Vsup) | 3V |
| Propagation Delay | 150 ns |
| Logic Function | OR, Shift Register |
| Logic Type | Shift Register |
| Output Polarity | CONFIGURABLE |
| Number of Bits per Element | 4 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 6 |
| fmax-Min | 8 MHz |
| Count Direction | BIDIRECTIONAL |
| Max Frequency@Nom-Sup | 2000000Hz |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
CD4035BNSRG4 Overview
In package 16-SOIC (0.209, 5.30mm Width), there is an embedded device. A total of 16 terminations can be found on the chip. A Tape & Reel (TR) case holds it. A voltage of 5V is specified for the part's operating supply. There are 1 elements on this part. Devices with 16 pins are available. The mounting method should be Surface Mount. As you can see, this component is mounted in the way of Surface Mount. A temperature range of -55°C~125°C is used for operation. Votage within 3V~18V is supplied. This electrical component belongs to the 4000B series. Similar parts can be found by searching for the CD4035 family. The operating supply voltage of this chip is noted to be within the range 15V. The following additional aspects of this section are worth noting: J AND K BAR SERIAL INPUT. For this part, the minimum supply voltage (Vsup) should not be less than 3V. In the device, there are 6 input lines.
CD4035BNSRG4 Features
With 16 pins
Mounted in Surface Mount type.
Based on CD4035 family
Operate supply voltage at 15V
CD4035BNSRG4 Applications
There are a lot of Texas Instruments CD4035BNSRG4 Shift Registers applications.
- store data in digital form
- Cache memory in CPU
- Counter
- Serial-to-parallel data conversion
- Interconnectors
- Parallel data
- data transfer
- Serial to parallel converter
- Data Processors
- Serial-to-parallel data conversion