CD4035BMG4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | J AND K BAR SERIAL INPUT |
| Subcategory | Shift Registers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 15V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Propagation Delay | 150 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 500 ns |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Output Polarity | CONFIGURABLE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Number of Bits per Element | 4 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 6 |
| fmax-Min | 8 MHz |
| Max Frequency@Nom-Sup | 2000000Hz |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD4035BMG4 Overview
This device can be found embedded within the package SOIC. This chip has a total termination count of 16. The part's operating supply voltage is rated 5V. On this part, there are 1 elements. In this device, there are 16 pins. Surface Mount is recommended for mounting. It is noted that this chip uses an operating supply voltage of 15V. There are also the following additional considerations in this section: J AND K BAR SERIAL INPUT. 6 input lines are available on the device. The total number of pins is 16. This product should not be used at temperatures above 125°C. It should not be less than -55°C when operating this device. A voltage of 18V is employed as the supply voltage. There is a voltage applied to the supply that is greater than 3V. It runs on a quiescent current of 100μA. This subcategory falls under the Shift Registers category.
CD4035BMG4 Features
With 16 pins
Operate supply voltage at 15V
Quiescent Current at 100μA
CD4035BMG4 Applications
There are a lot of Texas Instruments CD4035BMG4 Shift Registers applications.
- Sequence generator
- Data Processors
- 7-segment display control
- Cache memory in CPU
- ROM Chips
- data transfer
- Serial-to-parallel data conversion
- data manipulation
- Dual-rank shift, hold, and bus applications
- Counter