CD4035BM96E4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | J AND K BAR SERIAL INPUT |
| Subcategory | Shift Registers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Propagation Delay | 150 ns |
| Turn On Delay Time | 500 ns |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Output Polarity | CONFIGURABLE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Number of Bits per Element | 4 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 6 |
| fmax-Min | 8 MHz |
| Max Frequency@Nom-Sup | 2000000Hz |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
CD4035BM96E4 Overview
This device can be found embedded within the package SOIC. This chip has a total termination count of 16. There is a Tape & Reel (TR) case containing it. Parts with a 5V operating supply voltage are specified. A total of 1 elements are present on this part. 16 pins are available on the device. Surface Mount is recommended for mounting. In terms of supply voltage, this chip operates within the range of 15V. Please take note of the following additional aspects of this section: J AND K BAR SERIAL INPUT. There are 6 input lines available in the device. It has a total of 16 pins. It is recommended that it be used at temperatures below 125°C. In order for this device to function, the value should not be less than -55°C. Under 18V, this voltage is employed. Voltages higher than 3V are used for this supply. Shift Registers is its subcategory.
CD4035BM96E4 Features
With 16 pins
Operate supply voltage at 15V
CD4035BM96E4 Applications
There are a lot of Texas Instruments CD4035BM96E4 Shift Registers applications.
- Dual-rank shift, hold, and bus applications
- Remote control holding register
- store data in digital form
- temporary data storage
- Flash Memory
- Pseudo Random Pattern Generator
- 7-segment display control
- Sequence generator
- Pulse Extenders
- LED matrix control