CD4034BMG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | COMMON I/O PINS, SERIAL INPUT-PARALLEL OUTPUT AND SERIAL INPUT-SERIAL OUTPUT OPERATION AVAILABLE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 24 |
| Operating Supply Voltage | 15V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Propagation Delay | 170 ns |
| Turn On Delay Time | 700 ns |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 9 |
| fmax-Min | 7 MHz |
| Max Frequency@Nom-Sup | 2000000Hz |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
CD4034BMG4 Overview
This device can be found embedded within the package SOIC. This chip has a total termination count of 24. The case Rail/Tube contains it. Voltage rating of the part is 5V. This part has 1 elements. In this device, there are 24 pins. It is recommended to mount by Surface Mount in order to get the best results. In terms of supply voltage, this chip operates within the range of 15V. Additionally, please note the following: COMMON I/O PINS, SERIAL INPUT-PARALLEL OUTPUT AND SERIAL INPUT-SERIAL OUTPUT OPERATION AVAILABLE. There are 9 input lines available in the device. In total, there are 24 pins on it. Using it below 125°C is recommended. For this device to operate, it cannot be lower than -55°C. Under 18V, this voltage is employed. It is important to note that this supply voltage is higher than 3V.
CD4034BMG4 Features
With 24 pins
Operate supply voltage at 15V
CD4034BMG4 Applications
There are a lot of Texas Instruments CD4034BMG4 Shift Registers applications.
- Cache memory in CPU
- Counter
- data manipulation
- Interconnectors
- Dual-rank shift, hold, and bus applications
- Data Processors
- 7-segment display control
- Output expansion
- Delay Line
- Remote control holding register