CD4034BME4
| Parameters | |
|---|---|
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | COMMON I/O PINS, SERIAL INPUT-PARALLEL OUTPUT AND SERIAL INPUT-SERIAL OUTPUT OPERATION AVAILABLE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 24 |
| Operating Supply Voltage | 15V |
| Number of Elements | 1 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Propagation Delay | 170 ns |
| Turn On Delay Time | 700 ns |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 9 |
| fmax-Min | 7 MHz |
| Max Frequency@Nom-Sup | 2000000Hz |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
CD4034BME4 Overview
Embedded in a package of type SOIC, the device is available for use. There are 24 terminations on the chip. The case Rail/Tube contains it. 5V is the operating supply voltage of the part. A total of 1 elements can be found on this part. The device is equipped with 24 pins. Surface Mount is recommended for mounting. According to the specification, this chip's operating supply voltage falls within the range of 15V. The following additional aspects of this section are worth noting: COMMON I/O PINS, SERIAL INPUT-PARALLEL OUTPUT AND SERIAL INPUT-SERIAL OUTPUT OPERATION AVAILABLE. 9 input lines are available on the device. This board has 24 pins in total. It should be used below 125°C. It should not be lower than -55°C to operate this device. Under 18V, this voltage is employed. Voltages higher than 3V are used for this supply.
CD4034BME4 Features
With 24 pins
Operate supply voltage at 15V
CD4034BME4 Applications
There are a lot of Texas Instruments CD4034BME4 Shift Registers applications.
- Interconnectors
- Remote control holding register
- temporary data storage
- Parallel data
- store data in digital form
- Parallel to serial converter
- Serial to parallel converter
- Pulse Extenders
- Output expansion
- Data Format Converters