CD4031BEE4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | DELAYED BUFFERED CLOCK OUTPUT FOR CASCADING |
| Subcategory | Shift Registers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Temperature Grade | MILITARY |
| Number of Circuits | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Number of Bits | 64 |
| Propagation Delay | 180 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 500 ns |
| Logic Function | D-Type, Shift Register |
| Direction | Unidirectional |
| Output Polarity | COMPLEMENTARY |
| Logic IC Type | SERIAL IN SERIAL OUT |
| Number of Bits per Element | 4 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 2 |
| Number of Output Lines | 3 |
| fmax-Min | 6 MHz |
| Height Seated (Max) | 5.08mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD4031BEE4 Overview
PDIP is the package in which the device is embedded. 16 is the number of terminations on the chip. The Rail/Tube case contains it. 5V is the operating supply voltage of the part. It is equipped with a pin count of 16. Using Through Hole as a mount point is recommended. The operating supply voltage of this chip is noted to be within the range 15V. Please take note of the following additional aspects of this section: DELAYED BUFFERED CLOCK OUTPUT FOR CASCADING. There are 2 input lines available in the device. The total number of IC chip bits is 64. There are a total of 16 pins on it. Temperatures below 125°C are recommended for use. For this device to work, it should not go below -55°C. Under 18V, this voltage is employed. The supply voltage is higher than 3V. A total of 3 output lines are available for operation. As a result, it runs at a quiescent current of 100μA. The subcategory in which it falls belongs to is Shift Registers. This device contains 1 circuits.
CD4031BEE4 Features
With 16 pins
Operate supply voltage at 15V
With 3 output lines
Quiescent Current at 100μA
CD4031BEE4 Applications
There are a lot of Texas Instruments CD4031BEE4 Shift Registers applications.
- Dual-rank shift, hold, and bus applications
- Serial-to-parallel data conversion
- Sequence generator
- Cache memory in CPU
- ROM Chips
- Flash Memory
- Serial-to-parallel data conversion
- LED matrix control
- 8-bit data storage
- data manipulation