CD4021BPWG4
| Parameters | |
|---|---|
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Temperature Grade | MILITARY |
| Number of Circuits | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Number of Bits | 8 |
| Propagation Delay | 120 ns |
| Turn On Delay Time | 320 ns |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 9 |
| Number of Output Lines | 3 |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | OUTPUTS ALSO AVAILABLE AT 6TH AND 7TH STAGE OF THE SHIFT REGISTER ;ALSO OPERATES AS SISO |
| Subcategory | Shift Registers |
CD4021BPWG4 Overview
As a result, TSSOP package contains the embedded device. There are 16 terminations on the chip. A Rail/Tube case holds it. A voltage of 5V is specified for the part's operating supply. It has 16 pins. Mounting by Surface Mount is recommended. It is noted that the operating supply voltage of this chip falls within the range 15V. The following additional elements are important to note: OUTPUTS ALSO AVAILABLE AT 6TH AND 7TH STAGE OF THE SHIFT REGISTER ;ALSO OPERATES AS SISO. There are 9 input lines available in the device. A total of 8 bits are present on the IC chip. There are a total of 16 pins on it. Using it below 125°C is recommended. It should not be less than -55°C when operating this device. This supply voltage is employed under 18V. It is important to note that this supply voltage is higher than 3V. A total of 3 output lines are available for operation. This subcategory falls under the Shift Registers category. This device contains 1 circuits.
CD4021BPWG4 Features
With 16 pins
Operate supply voltage at 15V
With 3 output lines
CD4021BPWG4 Applications
There are a lot of Texas Instruments CD4021BPWG4 Shift Registers applications.
- LED matrix control
- Pulse Extenders
- Delay Line
- Parallel data
- Serial to parallel converter
- Output expansion
- Remote control holding register
- Sequence generator
- Interconnectors
- 7-segment display control