CD4021BPWE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | OUTPUTS ALSO AVAILABLE AT 6TH AND 7TH STAGE OF THE SHIFT REGISTER ;ALSO OPERATES AS SISO |
| Subcategory | Shift Registers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Temperature Grade | MILITARY |
| Number of Circuits | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Number of Bits | 8 |
| Propagation Delay | 120 ns |
| Turn On Delay Time | 320 ns |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 9 |
| Number of Output Lines | 3 |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
CD4021BPWE4 Overview
The device is embedded in TSSOP package. Taking the total number of terminations on the chip and adding them up, we get 16. There is a Rail/Tube case containing it. Voltage rating of the part is 5V. 16 pins are available on the device. Using Surface Mount as a mount point is recommended. According to the specification, this chip's operating supply voltage falls within the range of 15V. The following additional elements are important to note: OUTPUTS ALSO AVAILABLE AT 6TH AND 7TH STAGE OF THE SHIFT REGISTER ;ALSO OPERATES AS SISO. This device has 9 input lines available. It has 8 bits in total. This board has 16 pins in total. Temperatures below 125°C are recommended for use. For this device to work, it should not go below -55°C. A voltage of 18V is employed as the supply voltage. It is used at a voltage greater than 3V. Operating on 3 output lines is possible. It belongs to the subcategory of Shift Registers. An electronic device such as this one has 1 circuits in it.
CD4021BPWE4 Features
With 16 pins
Operate supply voltage at 15V
With 3 output lines
CD4021BPWE4 Applications
There are a lot of Texas Instruments CD4021BPWE4 Shift Registers applications.
- Cache memory in CPU
- Counter
- Serial-to-parallel data conversion
- 8-bit data storage
- Serial-to-parallel data conversion
- Pattern Recognizers
- Dual-rank shift, hold, and bus applications
- 7-segment display control
- Parallel data
- Serial to parallel converter