CD4021BEE4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| JESD-609 Code | e4 |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | OUTPUTS ALSO AVAILABLE AT 6TH AND 7TH STAGE OF THE SHIFT REGISTER ;ALSO OPERATES AS SISO |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Temperature Grade | MILITARY |
| Number of Circuits | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 320 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 320 ns |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Number of Input Lines | 9 |
| Number of Output Lines | 3 |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD4021BEE4 Overview
PDIP is a package containing the embedded device. 16 is the number of terminations on the chip. The part operates at 5V voltage. In this device, there are 16 pins. Mounting by Through Hole is recommended. In terms of supply voltage, this chip operates within the range of 15V. Additional aspects of this section include: OUTPUTS ALSO AVAILABLE AT 6TH AND 7TH STAGE OF THE SHIFT REGISTER ;ALSO OPERATES AS SISO. This device has 9 input lines available. The total number of IC chip bits is 8. 16 pins are present on it. Under 125°C, it is recommended that it be used. This device should not be operated with a value lower than -55°C. Under 18V, this voltage is employed. It is important to note that this supply voltage is higher than 3V. Operation is available on only 3 output lines. A quiescent current of 100μA is used. An electronic device such as this one has 1 circuits in it. TUBE is used to package the part.
CD4021BEE4 Features
With 16 pins
Operate supply voltage at 15V
With 3 output lines
Quiescent Current at 100μA
Packing Method : TUBE
CD4021BEE4 Applications
There are a lot of Texas Instruments CD4021BEE4 Shift Registers applications.
- Pseudo Random Pattern Generator
- Serial-to-parallel data conversion
- Data Processors
- data transfer
- Flash Memory
- Delay Line
- Parallel data
- Remote control holding register
- 8-bit data storage
- Interconnectors