CD4015BMTG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Number of Elements | 2 |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Propagation Delay | 120 ns |
| Turn On Delay Time | 400 ns |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Number of Bits per Element | 4 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 1 |
| fmax-Min | 8.5 MHz |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
CD4015BMTG4 Overview
SOIC is the package in which the device is embedded. A total of 16 terminations can be found on the chip. This item is packed in case Tape & Reel (TR). There is 5V operating supply voltage listed on the part. 2 elements are present in this part. 16 pins are provided on the device. Surface Mount is recommended for mounting. A range of 15V is noted as the operating supply voltage of this chip. In the device, there are 1 input lines. The total number of pins is 16. Using it below 125°C is recommended. Ideally, it should not fall below -55°C. A voltage of this type is employed under 18V. Voltages higher than 3V are used for this supply.
CD4015BMTG4 Features
With 16 pins
Operate supply voltage at 15V
CD4015BMTG4 Applications
There are a lot of Texas Instruments CD4015BMTG4 Shift Registers applications.
- Serial-to-parallel data conversion
- Counter
- temporary data storage
- Pulse Extenders
- Dual-rank shift, hold, and bus applications
- data manipulation
- data transfer
- Remote control holding register
- Pattern Recognizers
- Parallel to serial converter