CD4014BPWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | OUTPUTS ALSO AVAILABLE AT 6TH AND 7TH STAGE OF THE SHIFT REGISTER; ALSO OPERATES AS SISO |
| Subcategory | Shift Registers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Temperature Grade | MILITARY |
| Number of Circuits | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Number of Bits | 8 |
| Propagation Delay | 120 ns |
| Turn On Delay Time | 320 ns |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 9 |
| Number of Output Lines | 3 |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
CD4014BPWG4 Overview
The device is embedded in TSSOP package. 16 is the total number of terminations on the chip. There is a Rail/Tube case containing it. The part's operating supply voltage is rated 5V. The device is equipped with 16 pins. Using Surface Mount as a mount point is recommended. It's noted that the chip's operating supply voltage is in the range 15V. The following additional elements are important to note: OUTPUTS ALSO AVAILABLE AT 6TH AND 7TH STAGE OF THE SHIFT REGISTER; ALSO OPERATES AS SISO. The device has 9 input lines. IC chip bits total 8. This board has 16 pins in total. Under 125°C, it is recommended that it be used. It should not be lower than -55°C to operate this device. A voltage of 18V is used to supply this voltage. It is used at a higher voltage than 3V. It is necessary to operate 3 output lines of the system. The subcategory in which it falls belongs to is Shift Registers. 1 circuits are present in this device.
CD4014BPWG4 Features
With 16 pins
Operate supply voltage at 15V
With 3 output lines
CD4014BPWG4 Applications
There are a lot of Texas Instruments CD4014BPWG4 Shift Registers applications.
- data transfer
- store data in digital form
- Remote control holding register
- Serial to parallel converter
- Data Processors
- Pulse Extenders
- Data Format Converters
- data manipulation
- Data manipulation
- ROM Chips