CD4014BMTE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | OUTPUTS ALSO AVAILABLE AT 6TH AND 7TH STAGE OF THE SHIFT REGISTER; ALSO OPERATES AS SISO |
| Subcategory | Shift Registers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Temperature Grade | MILITARY |
| Number of Circuits | 1 |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Number of Bits | 8 |
| Propagation Delay | 120 ns |
| Turn On Delay Time | 320 ns |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 9 |
| Number of Output Lines | 3 |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
CD4014BMTE4 Overview
This device can be found embedded within the package SOIC. 16 is the sum of the number of terminations in the chip. A Tape & Reel (TR) case holds it. There is 5V operating supply voltage listed on the part. In this device, there are 16 pins. As a general recommendation, mounting by Surface Mount is recommended. According to the specification, this chip's operating supply voltage falls within the range of 15V. This section has the following additional features: OUTPUTS ALSO AVAILABLE AT 6TH AND 7TH STAGE OF THE SHIFT REGISTER; ALSO OPERATES AS SISO. In the device, there are 9 input lines that are available for use. It has a total of 8 pins. The total number of pins is 16. Using it below 125°C is recommended. For this device to work, it should not go below -55°C. Under 18V, this supply voltage is employed. The supply voltage is higher than 3V. There are 3 output lines to operate. It belongs to the subcategory of Shift Registers. In this device, there are 1 circuits that are active at the same time.
CD4014BMTE4 Features
With 16 pins
Operate supply voltage at 15V
With 3 output lines
CD4014BMTE4 Applications
There are a lot of Texas Instruments CD4014BMTE4 Shift Registers applications.
- Cache memory in CPU
- Pulse Extenders
- Serial-to-parallel data conversion
- Serial-to-parallel data conversion
- Data Processors
- Flash Memory
- Dual-rank shift, hold, and bus applications
- 8-bit data storage
- Data Format Converters
- ROM Chips