CD4014BMT
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| Packing Method | TR |
| Max Power Dissipation | 100mW |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 17MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CD4014 |
| Function | Parallel or Serial to Serial |
| Qualification Status | Not Qualified |
| Output Type | Push-Pull |
| Operating Supply Voltage | 15V |
| Number of Elements | 1 |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Propagation Delay | 120 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 320 ns |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Max Input Current | 100nA |
| Schmitt Trigger | No |
| Number of Input Lines | 9 |
| Number of Output Lines | 3 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4014BMT Overview
There is a 16-SOIC (0.154, 3.90mm Width) package embedded with the device. 16 is the total number of terminations on the chip. A Tape & Reel (TR) case is used to pack it. The part's operating supply voltage is rated 5V. It is a part that has 1 elements on it. 16 pins are provided on the device. The mounting method should be Surface Mount. Its mounting method is Surface Mount. The operating temperature ranges -55°C~125°C. Voltages within 3V~18V are supplied to the device. In the 4000B series, this electrical component is found. Similar parts can be found using the CD4014 family. The operating supply voltage of this chip is noted to be within the range 15V. The minimum supply voltage (Vsup) for this part should not be less than 3V. 9 input lines are available on the device. There are 3 output lines to operate. It runs with a quiescent current of 100μA. There is a TR packaging for the part. There is 17MHz frequency set on the device.
CD4014BMT Features
With 16 pins
Mounted in Surface Mount type.
Based on CD4014 family
Operate supply voltage at 15V
With 3 output lines
Quiescent Current at 100μA
Packing Method : TR
CD4014BMT Applications
There are a lot of Texas Instruments CD4014BMT Shift Registers applications.
- Serial-to-parallel data conversion
- Parallel to serial converter
- Counter
- Remote control holding register
- Delay Line
- Interconnectors
- 8-bit data storage
- Data Format Converters
- Sequence generator
- store data in digital form