CD4014BM96
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | CD4014 |
| Function | Parallel or Serial to Serial |
| Output Type | Push-Pull |
| Operating Supply Voltage | 15V |
| Number of Elements | 1 |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Propagation Delay | 120 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 320 ns |
| Logic Function | D-Type, OR, Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Number of Input Lines | 9 |
| Number of Output Lines | 3 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD4014BM96 Overview
This device can be found embedded within the package 16-SOIC (0.154, 3.90mm Width). 16 is the number of terminations on the chip. It is packed in a case number Tape & Reel (TR). This part has an operating supply voltage of 5V. There are 1 elements on this part. There are 16 pins on the device. The recommended mounting method is Surface Mount. Surface Mount is the way in which this component is mounted. It is important to note that the operating temperature range is -55°C~125°C. There is a voltage supply within 3V~18V. The 4000B series represents this electrical component. By using the CD4014 family, you can find similar parts. The operating supply voltage of this chip is noted to be within the range 15V. The minimum supply voltage (Vsup) for this part should not be less than 3V. The device has a total of 9 input lines. There are 3 output lines to operate. There is a quiescent current of 100μA flowing through it. In order to package the part properly, TR is used.
CD4014BM96 Features
With 16 pins
Mounted in Surface Mount type.
Based on CD4014 family
Operate supply voltage at 15V
With 3 output lines
Quiescent Current at 100μA
Packing Method : TR
CD4014BM96 Applications
There are a lot of Texas Instruments CD4014BM96 Shift Registers applications.
- Remote control holding register
- Data Processors
- Counter
- Interconnectors
- Dual-rank shift, hold, and bus applications
- ROM Chips
- Serial-to-parallel data conversion
- data transfer
- LED matrix control
- 7-segment display control