CD4013BNSRG4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOP |
| Number of Pins | 14 |
| Weight | 208.312296mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Frequency | 24MHz |
| Pin Count | 14 |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Load Capacitance | 50pF |
| Number of Bits | 1 |
| Propagation Delay | 300 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 45 ns |
| Logic Function | AND, D-Type, Flip-Flop |
| Logic IC Type | D FLIP-FLOP |
| High Level Output Current | -4.2mA |
| Low Level Output Current | 6.8mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD4013BNSRG4 Overview
SOPis the packaging method. As part of the package Tape & Reel (TR), it is embedded. The list contains 2 elements. Currently, there are 14 terminations. A voltage of 5V is used as the power supply for this D latch. The electronic part is mounted in the way of Surface Mount. The 14pins are designed into the board. A Positive Edgeclock edge trigger is used in this device. The RS flip flops belongs to FF/Latches base part number. 1bits are used in its design. In light of its reliable performance, this T flip flop is well suited for TAPE AND REEL. In order to operate, the chip has 4 output lines. The number of input lines is 1. There is a consumption of 20μAof quiescent current from it. In this case, the high level output current is set to -4.2mA. There is no low level output current set at 6.8mA. It is recommended that the operating temperature be lower than 125°C. Temperatures above -55°Cshould be used. The RS flip flop is designed to operate with a minimal supply voltage of 3VV. There is a maximum supply voltage of 18V. The frequency can be set to 24MHz. It uses D FLIP-FLOPas its logic IC. As a result, it is equipped with 2 functions . 14pins are provided on the D latch.
CD4013BNSRG4 Features
Tape & Reel (TR) package
14 pins
1 Bits
2 Functions
14 pin count
CD4013BNSRG4 Applications
There are a lot of Texas Instruments CD4013BNSRG4 Flip Flops applications.
- Data Synchronizers
- Differential Individual
- Registers
- QML qualified product
- ESCC
- Computers
- 2 – Bit synchronous counter
- Memory
- Bounce elimination switch
- Digital electronics systems