CD4013BM96
| Parameters | |
|---|---|
| Ambient Temperature Range High | 125°C |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 4000B |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latch |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 3V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | CD4013 |
| Function | Set(Preset) and Reset |
| Number of Outputs | 4 |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 6.8mA |
| Clock Frequency | 24MHz |
| Propagation Delay | 300 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 45 ns |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Number of Inputs | 1 |
| Current - Output High, Low | 6.8mA 6.8mA |
| Max I(ol) | 0.0068 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 90ns @ 15V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Power Supply Current-Max (ICC) | 0.06mA |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 3500000Hz |
CD4013BM96 Overview
As a result, it is packaged as 14-SOIC (0.154, 3.90mm Width). The package Tape & Reel (TR)contains it. T flip flop uses Differentialas its output configuration. This trigger is configured to use Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A voltage of 3V~18Vis required for its operation. It is operating at a temperature of -55°C~125°C TA. D-Typeis the type of this D latch. This type of FPGA is a part of the 4000B series. You should not exceed 24MHzin the output frequency of the device. As a result, it consumes 4μA quiescent current. A total of 14terminations have been recorded. The CD4013family includes it. The power supply voltage is 5V. A JK flip flop with a 5pFfarad input capacitance is used here. A part of the electronic system is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 14. This device's clock edge trigger type is Positive Edge. It is included in FF/Latch. For normal operation, the supply voltage (Vsup) should be kept above 3V. To achieve this superior flexibility, 2 circuits are used. As a result of its reliability, this D flip flop is ideally suited for TR. Featuring the maximum design flexibility, it has an output current of 6.8mA . Quiescent current is consumed by the D latch in the amount of 20μA. The system employs 1inputs.
CD4013BM96 Features
Tape & Reel (TR) package
4000B series
14 pins
CD4013BM96 Applications
There are a lot of Texas Instruments CD4013BM96 Flip Flops applications.
- Differential Individual
- Memory
- Reduced system switching noise
- Modulo – n – counter
- Frequency division
- 2 – Bit synchronous counter
- Frequency Divider circuits
- High Performance Logic for test systems
- Supports Live Insertion
- Computers