CD40109BNSRE4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Package / Case | SOP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Output Type | Voltage |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 6.8mA |
| Number of Bits | 4 |
| Propagation Delay | 240 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 740 ns |
| Logic Function | Level Shifter |
| Data Rate | 10 Mbps |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.0068 A |
| Prop. Delay@Nom-Sup | 600 ns |
| High Level Output Current | -4.2mA |
| Low Level Output Current | 4.2mA |
| Control Type | ENABLE HIGH |
| Power Supply Current-Max (ICC) | 0.12mA |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD40109BNSRE4 Overview
Embedded in the SOP package, it is now available to you.A package of Tape and Reel has been used.Voltage is used for the output it is configured with.Ending a transmission line involves 16 terminations.Power comes from a voltage of 5V.The pin count of this device is 16.The board has 16 pins.There are 4 bits in this electronic part.The supply voltage is limited to 18V.A minimal voltage of 3V is needed to operate it.Logic ICs it uses are of the BUS DRIVER type.The 2 terminations involve matching the characteristic impedance of a transmission line to the device that ends the line.Level translators consumes 20μA of quiescent current wLevel translatorshout being affected by external factors. As a result of its reliable performance, it is well suited for TR.The operating temperature should be higher than -55°C.There should be a temperature below 125°C at which the system is operating.A configuration of 4 outputs has been set up for it.In addition to its maximum design flexibility, 6.8mA features the lowest output current.
CD40109BNSRE4 Features
SOP package
16 pin count
16 pins
4 outputs
CD40109BNSRE4 Applications
There are a lot of Texas Instruments CD40109BNSRE4 voltage translators & level shifters applications.
- Available in Military (–55°C/125°C) Temperature Range
- Driving Indicator LEDs or Buzzers
- Temperature Ranges (1)
- Extended Product Life Cycle
- Printers and Other Peripherals
- Controlled Baseline
- SMBus
- Controlled Baseline
- Debouncing a mechanical switch
- TVs