CBT3306GT,115
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-XFDFN |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | Bus Switch |
| Resistance | 15Ohm |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74CBT3306 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 1 x 1:1 |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Number of Bits | 1 |
| Propagation Delay | 5 ns |
| Quiescent Current | 3μA |
| Turn On Delay Time | 5 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Turn-Off Delay Time | 5 ns |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 0.5mm |
| Length | 1.95mm |
| Width | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 13 Weeks |
| Contact Plating | Gold |
CBT3306GT,115 Overview
Due to the fact that it is provided in the 8-XFDFN, digital switch allows the board to be compacted.The package is packaged in the manner of Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Design engineers have more flexibility when digital controlled switch operates at 4.5V~5.5V voltage.In addition to being a member of the 74CBT series, these multiplexers have a wide range of applications.The basic configuration of this system includes 8 terminations.There is a base part number 74CBT3306 that can be used to locate signal switch's related components as well.The multiplexer's system is supplied with a voltage of 5V.This turn signal switch has 8 component pins.Single is employed as its supply type.A configuration of 8 pins is used.As you can see, it is mounted in the direction of Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.Signal multiplexer provides 1 bits.In the absence of external influences, it consumes 3μA current of multiplexer ic.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.The resistance is 2.The system operates with a resistance of 15Ohm.This mux switch configuration has 2 elements.
CBT3306GT,115 Features
Supplied in the 8-XFDFN package
Adopting a supply type of Single
Operating with the supply voltage of 5V
CBT3306GT,115 Applications
There are a lot of Nexperia USA Inc. CBT3306GT,115 Signal Switches / Multiplexers / Decoders applications.
- Relay
- Transmission from the computer system of a satellite
- Home automation system
- High-performance memory-decoding applications
- A/D converters
- Enabling different rows of memory depending on address in memory chips
- Electronic circuits
- Automation system
- Encrypted communications system
- GLAN