BV1LB085FJ-CE2
| Parameters | |
|---|---|
| Factory Lead Time | 13 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 2017 |
| Series | Automotive, AEC-Q100 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Interface | On/Off |
| Current - Output (Max) | 13A |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 3V~5.5V |
| Fault Protection | Over Current, Over Temperature |
| Rds On (Typ) | 85m Ω |
| RoHS Status | ROHS3 Compliant |
BV1LB085FJ-CE2 Overview
The LED driver's packaged as a Cut Tape (CT).The 8-SOIC (0.154, 3.90mm Width) package contains it.It has been mounted as Surface Mount on the LED driver.It owns the General Purpose switch type.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.There is a default setting of 1 for output.The LED driving board is powered by a voltage of 3V~5.5V.A maximum output voltage of P-Channel volts can be achieved by this LED driver.Its maximum output voltage is 13AV.This electrical component is part of the Automotive, AEC-Q100 series.
BV1LB085FJ-CE2 Features
BV1LB085FJ-CE2 Applications
There are a lot of ROHM Semiconductor BV1LB085FJ-CE2 Power Switches ICs applications.
- Hard Disk Drives
- Set-top-box
- Storage Drives
- Telecom and Network Systems
- PC Cards
- Mobile Communication Devices
- Hot Swap
- Wearable Devices
- Notebook and Tablet Computers
- Hot Swaps